People nearby who'll do it with you

I think it needs a sway bar and just a mechanic's once over. Additional Oil change, brakes, fluids, etc.... I can do the work, but I value a trained eye to ensure I'm not missing anything. I can pull it off street parking in my yard to work on it. The car runs, I just want to ensure it runs reliably.

I've tried a few times and each time the screen ends up saggy. I'm not sure what I'm doing wrong. I have about 10 window total and a door. Also, I'm just a little uncomfortable with getting to the 2nd story ones. I know I can pull them inside and do them but the height still makes me uncomfortable. I'd rather you do those completely.

I am building a new 'Small Business' and would like help some help building and launching a website. I am very interested in learning how to 'support' the website once it is live so I can do this myself. I love to learn and I very excited to learn about any AI tools tips/tricks you may be willing to share that would be beneficial to consider for a small business.

Our couch is being delivered in a few weeks & we need someone to help assemble it!

Help me rebuild my bike

I have a 2006 Yamaha R6 project Rebuild. I bought all the parts and don't have the confidence to do the repairs. If you're good with bike repairs and can give me some guidance and your hands in the tricky parts, I'll gladly compensate you for your time.

This gig exists for automated testing only.

2 years of HA, 40+ devices across Zigbee/Z-Wave/WiFi. Want a 2-hour remote session to clean up and build reliable automations.

14-month mixed reef. Random bleaching, diatom bloom, Alk swinging 1.5 dKH/day. Just got ICP done. Need a real diagnosis.

Removing a 14-ft load-bearing wall. Need a licensed PE to review, size the LVL, and provide a letter for my building permit. Remote is fine.

Never fly fished. Planning a Durango / Pagosa Springs trip. Want a guided experience on water someone actually knows.

Want to grow lettuce and herbs year-round in my basement. 4x8 tent, ~$800 budget. Need a session (remote or Austin TX) to design the right system.

Frame built, electronics wired, stuck on Klipper config and calibration. Need someone who knows Voron — remote or Austin TX.

Wife and I considering a Class C or Class A in the $75–100k range. Want a full day with someone living the lifestyle.

Have the engine, trans, and plan. Stuck on ECU wiring, T56 crossmember fab, and cooling routing. Need help in Phoenix area.

Installed a package in April. Two inspections in, not sure what's normal vs concerning. Found possible queen cells. Southern Wisconsin.

Random misfire, both banks lean. Already replaced plugs, wires, both O2 sensors. Need in-person help in Phoenix area.

Finishing my basement, adding a bathroom. Need guidance on drain rough-in, wet vent design, and tying into the main stack. Nashville TN.

Handy homeowner in Chattanooga. Want to do this myself with a licensed electrician walking me through it.